DROP CHUTES FOR CONCRETE MIXERS
SARAKA truck mixers equipped with fully hydraulic BigReach HR-series telescopic drop chutes can be used as a more cost-effective alternative for concrete pumps in small and medium size concrete castings. This solution gives possibility for only with the truck driver to cast concrete up to 1 m in height from the ground level and with full 11 m reach on 200 degree working radius. This makes small and mid-size castings on low levels extremely cost effective as no other personnel or equipment is needed.
SARAKA BigReach HR 11 TECHNICALLY UNBEATABLE
The BigReach HR telescopic chute is made of hardened special steel, which makes the structure durable and lightweight. All the movements of the chute are fully hydraulic and do not require any adjustments. The edges of all elements of the renewed BigReach HR-11 telescopic chute are bent outwards. This profile protects the cylinders from possible bumps or in the event of an overflow of the concrete and at the same time the cross-sectional shape of the chute combines a rigid and lightweight structure with an optimal flow of concrete. The narrow base design allows precise casting for molding up to 1 m in height
Model: BigReach HR-11
Dimension: 10 m + 1 m
Working area: 200 deg / 200 m2
Hydraulic pressure max 350 bar
Hydraulic pump 41 ccm/rev or LS 60 ccm/rev
Hydraulic tank 40 ltr or 100 ltr
LARGEST WORK AREA
BigReach HR telescopic chute provide the largest working area in the market. With its maximum dimension and the largest turning radius on the market whole 95 m2 work area is obtained without moving the truck. Thanks to an optimal overall design, the entire area can be cast into molds up to 1 m above ground level if necessary. BigReach HR-11 is normally controlled by proportional radio control.
EFFECTIVITY WITH DROP CHUTES
SARAKA truck mixer can optionally be equipped also with two other drop chutes along with the BigReach. These are the fully hydraulic pump-spout for serving concrete pumps and mechanically adjustable drop chute giving the possibility to unload the concrete on an angle or directly to the side of the truck if needed. All these three different drop chute models have been developed to make it easier and more profitable to work.
SARAKA truck mixer can simultaneously be equipped with three different drop chutes – each of wich designed to make every day work more profitable
THE CHUTE FOR SERVING CONCRETE PUMPS
The pump-spout has been developed for unloading to the concrete pump in situations where it is possible to reverse to the concrete pump directly. Hydraulic pump-spout can be controlled electrically either from the cabin, via remote control or on the side and work platform switches. If necessary, the pump-spout can be equipped with a rubber extension of 0.5 m
MECHANICAL DROP CHUTE
One-meter long chute that can be quickly adjusted to the desired operating position. The chute can be extended with an 1 m extension spout. Adjustment and extension features make it easy to unload even to the side, back or very low, for example on wheelbarrows. When this chute is not used, it is locked under the worktop and does not interfere with the use of the mixer or other casting equipment
The extension fits also on the BigReach telescopic drop chute giving best reach on the market
LSB-serie LIGHT WEIGHT TRUCK MIXERS
LSB serie mixers are designed to work with accessory.
It’s design gives space on the side of the drum for equipment like telescopic.